IAMU Research Project FY2024 Final Report

Facilitating greener education and cleaner shipping through the development of NOvel bespoke microtextured metals to combat bioFOULing in niche areas on vessels

Publication Year 2025
Research Coordinator Simone Dürr
Research Partners Sheelagh Conlan; Martin Sharp; Eduardo Blanco-Davis; Tahsin Opoz; Hiren Kotadia; Bogdan Hnatiuc; Cristina Dragomir; Simona Ghita; Mihaela Hnatiuc; Yasin Arslanoglu; Özkan Ugurlu; Refik Özyurt; Mani Jayaprakashvel; Radhakrishnan Muthezhilan; Vijayaraj Radha
Publisher International Association of Maritime Universities (IAMU)
DOI https://doi.org/10.68436/r20240306

Download PDF

Abstract

Biofouling, the unwanted biological growth on ships, causes economic and environmentally penalties by, for example, increasing fuel costs, emissions, corrosion and transfers non-native invasive species. With updated international regulations not only were biofouling guidelines improved but training for maritime personal and students is a requirement. Current antifouling solutions are coatings such as self-polishing antifouling coatings containing biocides damaging the marine environment. More modern coatings use foul-release technology that requires the vessel to be in transit. These coatings are also costlier and less effective than traditional technologies. Recently, biocidal catalysts and boosters were introduced to these originally environmentally friendly coatings causing biocidal leaching into the environment. Consequently, a new environmentally friendly and sustainable approach is needed. The aim in the IAMU and Nippon Foundation funded project NOFOUL was to develop bespoke novel antifouling laser machined textures (in tandem with non-thermal plasma) on metals for diverse maritime environments (Irish Sea, Black Sea, Marmara Sea, Bay of Bengal) and niche vessel areas, for example where coatings cannot be reapplied. The four objectives were to: 1) fine-tune existing novel non-toxic antifouling textures; 2) demonstrate the antifouling efficacy of the final texture in diverse maritime environments and the potential synergistic effect texture/plasma; 3) exchange biofouling and antifouling training within the team = knowledge transfer and impactful dissemination of project outcomes (IAMU in/outside); 4) establish a professional IAMU Biofouling Network. The NOFOUL project partners were LJMU (project lead), CMU, ITU, ODU and AMET (Project website: https://www.ljmu.ac.uk/microsites/project-nofoul). In pilot experiments by LJMU existing microtextures on 316L 2B stainless steel panels (50x50x0.9mm) were fine-tuned and their antifouling efficacy was tested in the Liverpool South Docks, UK. From these 15 textures three textures were selected for testing at the partner sites. In pilot experiments by CMU the GlidArc technology was evaluated and two technologies, Dielectric Barrier Discharge and Minitorch, were selected to treat the sample panels with non-thermal plasma causing an antifouling effect on the surface. Selected textures were produced on non-thermal plasma treated stainless steel panels (24 panels including controls, n=3) and sent to project partners to run their field experiments. Trained project partners were running their own field experiments (participatory research) in the spring 2025. All experiments were complete by the partners, assessed by LJMU and the best antifouling texture with non-thermal plasma and without was selected. All NOFOUL partners were received training in biofouling (workshop) and site-specific training in person by LJMU to be able to run the field antifouling test in order to achieve standardization of the experiment and thus, allowing comparisons between sites. Two types of textures demonstrated lowest biofilm percentage coverage at LJMU, AMET2 (2 sites), and CMU, ODU, respectively. The same textures but plus plasma treatment, demonstrated lowest biofilm percentage coverage at AMET2, and LJMU, CMU, respectively. Even as the selection of the best textures may appear the same with and without plasma treatment for these sites, nevertheless, the outcomes are not the same. AMET2 may benefit from one texture with and without plasma but LJMU may only benefit from this texture under non-plasma conditions and may benefits more from the other texture under plasma treatment, while CMU benefits from the texture with and without plasma treatment. The outcomes of different types of textures with and without plasma in their antifouling performance was better at some sites and worse at other sites. Biofilm in quality and quantity may not the same globally, rather it may vary between the NOFOUL sites at large and small scales. Thus, the changes in biofilm may lead to different antifouling solution requirements as NOFOUL demonstrated with the unique and novel environmentally friendly antifouling solution textures with plasma treatment. Knowledge transfer and exchange of biofouling and antifouling between project partners (LJMU, CMU, ITU, ODU, AMET) were essential to achieve the project wide field experiment under standardized conditions. NOFOUL used research in the project as a tool for a case study demonstrating training and knowledge transfer in biofouling and antifouling. The first step was a 2-day workshop at LJMU during which LJMU used an interactive approach containing short lectures, discussions, laboratory visits and practical as well as a field trip to exchange knowledge between all partners. The second step was site specific training by LJMU at the partner sites. During the one to one training partners were able to prepare for their field experiment to a common standard in order to compare research results and interpret in the context within the project. The outcomes of the training and knowledge exchange between partners in biofouling and antifouling were evaluated and interpreted with a view of expanding the approach for the wider IAMU community. During NOFOUL the IAMU Biofouling Network was initiated and has a positive effect on IAMU members from webinar to webinar. During the webinars knowledge on biofouling was not just only transferred to participants but knowledge exchange is demonstrated in the question and answer sessions while developing into discussions. In the webinars, NOFOUL trained non-specialists disseminated the NOFOUL research and demonstrated their new knowledge and skills. The NOFOUL project's higher education initiative on biofouling by CMU demonstrated impressive success in engaging electrical engineering students with environmental marine sciences concepts. The strong interest levels reported by students, coupled with their openness to further learning and project participation, indicate effective educational content and delivery. The survey showed valuable insights about student preferences, highlighting engineering applications, pollution concerns, and environmental impacts as particularly resonant topics. The NOFOUL project team achieved all aims and objectives. All deliverables are met and dissemination of the project is ongoing with two scientific articles and conference presentation. With trained non-specialists NOFOUL demonstrated the antifouling performance of the environmentally friendly antifouling solution, the microtextures in optional combination with non-thermal plasma treatment. Both do not leach microplastics nor biocides in the marine environment. The NOFOUL project developed training and knowledge exchange approaches and trained non-specialists for biofouling. Their training was evidenced with a 2-day workshop and a participatory research field experiment, and resulted in their knowledge transfer in a Biofouling Network with webinars and Higher Education teaching. Recommendations from NOFOUL are: 1) Increase the qualified personnel in biofouling and antifouling so students and mariners achieve their required skills in the field as in Resolution MEPC.377(80). Diversify teaching and training activities by mentoring, improving resource access, and their recognition and supported incentives. 2) Accessibility of real-world experimental approaches for maritime students and mariners by maritime institutes. 3) Encourage innovation in biofouling and antifouling solutions by expanding funding opportunities and facilitating start-ups within maritime institutes. 4) Grow the IAMU Biofouling Network to support MET and real-world experimental opportunities in the form of participatory research. Overall, our novel antifouling solution demonstrated that our bespoke microtextures, tested in the field under a number of different marine environments by local trained NOFOUL non-specialists using the same experimental protocol, showed antifouling performance by reducing the percentage coverage of local marine biofilm. This established a loop between our research and our biofouling training within NOFOUL facilitated the transfer of the new knowledge by the trained NOFOUL non-specialists to other non-specialists in IAMU such as in education and in the IAMU Biofouling Network.

Keywords

Biofouling, Antifouling, Environmentally Friendly, Maritime Education and Training (MET), Participatory Research, Research/Experimental Design Application

References

  1. Wahl, M. Marine epibiosis. I. Fouling and antifouling: some basic aspects. Marine Ecology Progress Series, 58, (1989) 175-189.
  2. Dürr, S. & Thomason, J.C. (2010) Preface. In: Biofouling (eds S. Dürr & J.C. Thomason), XIII-XVII, Wiley-Blackwell, Oxford, UK.
  3. IOC-UNESCO and GEF-UNDP-IMO GloFouling Partnerships. 2024. Best Practices in Biofouling Management. Vol. 3: Biofouling prevention and management in offshore renewable energy infrastructure and construction. Paris, IOC-UNESCO and IMO. (IOC Technical Series, 174)
  4. Poloczanska, E.S. and Butler, A.J. (2010). Biofouling and climate change. In: Biofouling (eds. S. Dürr and J.C. Thomason), 333–348. Oxford: Wiley-Blackwell.
  5. Schultz, M.P., Bendick, J.A., Holm, E.R. & Hertel, W.M. Economic impact of biofouling on a naval surface ship. Biofouling, 27(1), (2011), 87-98.
  6. Coutts, A.D. and Dodgshun, T.J., The nature and extent of organisms in vessel sea-chests: a protected mechanism for marine bioinvasions. Marine pollution bulletin, 54, 7, (2007) pp.875-886.
  7. Cheyne, I. (2010a) Regulation of Marine Antifouling in International and EC Law. In: Biofouling (eds S. Dürr & J.C. Thomason), pp 306-318, Wiley-Blackwell, Oxford, UK.
  8. Cheyne, I. (2010b) Implications of International and European Regulatory Developments for Marine Antifouling. In: Biofouling (eds S. Dürr & J.C. Thomason), pp 388-395, Wiley-Blackwell, Oxford, UK.
  9. Blossom, N., Szafranski, F. and Lotz, A. Use of Copper-Based Antifouling Paint: A U.S. Regulatory Update. Coatingstech, March, (2018), 63-68.
  10. Yebra, D.M., Kiil, S. & Johansen, D, Antifouling technology – past present and future steps towards efficient and environmentally friendly antifouling coatings. Progress in Organic Coatings, 50, (2004), 75-104.
  11. Liu, X., Yang, J.-L., Rittschof, D., Maki, J.S. and Gu, J.-D. Redirecting marine antibiofouling innovations from sustainable horizons. Trends in Ecology and Evolution, 37, 6, (2022), pp. 469–72.
  12. Callow, J.A. & Callow. M.E., Trends in the development of environmentally friendly fouling-resistant marine coatings. Nature Communications, 2, (2011), 10.
  13. Walters, L.J. & Wethey, D.S. Settlement and early post settlement survival of sessile marine invertebrates on topographically complex surfaces: The importance of refuge dimensions and adult morphology. Marine Ecology Progress Series, 137, (1996), 161-171.
  14. Callow, M.E. and Callow, J.A. Marine biofouling: a sticky problem. Biologist 49, (2002). 5,
  15. Scardino, A., Harvey, E. and De Nys, R., Testing attachment point theory: diatom attachment on microtextured polyimide biomimics. Biofouling, 22 (1), (2006), 55-60.
  16. Rittschof, D. & Costlow, J.D. Bryozoan and barnacle settlement in relation to initial surface wettability: a comparison of laboratory and field studies. In: Top. Mar. Biol. Proc. 22nd European Marine Biology Syrup., edited by J.D. Ros, Instituto de Ciencias del Mar, Barcelona, Spain, (1989), 441-416.
  17. Roberts, D., Rittschof, D., Holm, E., Schmidt, A.R., Factors influencing initial larval settlement: temporal, spatial and surface molecular components. J. Exp. Mar. Biol. Ecol., 150, (1991), 203-2011.
  18. Dahlström, M., Jonsson, H., Jonsson, P.R. and Elwing, H., Surface wettability as a determinant in the settlement of the barnacle Balanus improvisus (Darwin). Journal of Experimental Marine Biology and Ecology, 305 (2), (2004) 223-232.
  19. Carman, M.L., Estes, T.G., Feinberg, A.W., Schumacher, J.F., Wilkerson, W., Wilson, L.H., Callow, M.E., Callow, J.A. and Brennan, A.B., Engineered antifouling microtopographies – Correlating wettability with cell attachment. Biofouling, 22(1), (2006), 11–21.
  20. Kubiak, K., Wilson, M., Mathia, T. and Carval, P., Wettability versus roughness of engineering surfaces. Wear, 271 (3-4), (2011), 523-528.
  21. Cassie, A. Contact angles. Discussions of the Faraday society, 3, (1948), 11-16.
  22. Cassie, A. and Baxter, S., Wettability of porous surfaces. Transactions of the Faraday society, 40, (1944), 546-551.
  23. Erbil, H.Y. and Cansoy, C.E., Range of applicability of the Wenzel and Cassie− Baxter equations for superhydrophobic surfaces. Langmuir, 25 (24), (2009), 14135-14145.
  24. Wenzel, R.N., Resistance of solid surfaces to wetting by water. Industrial & Engineering Chemistry, 28 (8), (1936), 988-994.
  25. Zhang, B. X., Wang, S. L. and Wang, X. D., Wetting Transition from the Cassie-Baxter State to the Wenzel State on Regularly Nanostructured Surfaces Induced by an Electric Field. Langmuir, 35(3), (2019), 662–670.
  26. Berntsson, K.M., Andreasson, H., Jonsson, P. R., Larsson, L., Ring, K., Petronis, S. and Gatenholm, P., Reduction of barnacle recruitment on micro-textured surfaces: Analysis of effective topographic characteristics and evaluation of skin friction. Biofouling, 16(2–4), (2000), 245–261.
  27. Brennan, A.B., Baney, R.H., Carman, M.L., Estes, T.G., Feinberg, A.W., Wilson, L.H. and Schumacher, J.F. (2010) Surface Topographies for non-toxic bioadhesion control. US Patent No 7,650,848.
  28. Bizi-Bandoki, P., Benayoun, S., Valette, S., Beaugiraud, B. and Audouard, E., Modifications of roughness and wettability properties of metals induced by femtosecond laser treatment. Applied Surface Science, 257 (12), (2011), 5213-5218.
  29. Cunha, A., Serro, A.P., Oliveira, V., Almeida, A., Vilar, R. and Durrieu, M.-C., Wetting behaviour of femtosecond laser textured Ti–6Al–4V surfaces. Applied Surface Science, 265, (2013), 688-696.
  30. Sharp, M. C., Rosowski, A. P., & French, P. W. Nanosecond laser texturing of aluminium for control of wettability. In M. Green (Ed.), Industrial Laser applications symposium (ILAS 2015), Vol. 9657, (2015), 7 pages. Kenilworth, UK: Spie-Int Soc optical engineering.
  31. Dunn, A., Wasley, T.J., Li, J., Kay, R.W., Stringer, J., Smith, P.J., Esenturk, E., Connaughton, C. and Shephard, J.D., Laser textured superhydrophobic surfaces and their applications for homogeneous spot deposition. Applied Surface Scienc, 365, (2016), 153-159.
  32. Horner, R. (2020) Laser surface texturing to create biomimetic surface topographies for marine antifouling efficacy testing. PhD thesis, Liverpool John Moores University, UK.
  33. Moejes, K. (2020) Development of a bespoke sensory surface to combat biofouling in the maritime sector. PhD thesis, Liverpool John Moores University, UK. Filed as UK patent application No 22 16217.6.
  34. Naïtali, M., Kamgang-Youbi, G., Herry, J. M., Bellon-Fontaine, M. N., & Brisset, J. L., Combined effects of long-living chemical species during microbial inactivation using atmospheric plasma-treated water. Applied and environmental microbiology, 76(22), (2010), 7662–7664. 1.
  35. Hnatiuc, M., Sabau, A., Hnatiuc, B., Ghita, S., Comparative analysis of biofouling microorganisms after treatment with glidarc. Modern Technologies in Industrial Engineering (ModTech2015) IOP Conf. Series: Materials Science and Engineering, 95, 012057,(2015), 6pp.
  36. Hnatiuc, B., Sabau, A., Ghita, S., Hnatiuc, M., Dumitrache C.-L., Pellerin, S., Influence of GlidArc treatment on layers formation of Biofouling, The 7th edition of the International Conference on Advanced Topics in Optoelectronics, Microelectronics and Nanotechnologies, ATOM-N 2014, 21 – 24 August 2014, Constanta, Romania, Proc. SPIE 9258, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VII, 92580A (February 21, 2015).
  37. Hnatiuc, B., Ghita, S., Sabau A., Hnatiuc, M., Dumitrache, C.-L., Wartel, M., Treatment with activated water by GlidArc technology of bacteria producing Biofouling, The 7th edition of the International Conference on Advanced Topics in Optoelectronics, Microelectronics and Nanotechnologies, ATOM- N 2014, 21 – 24 August 2014, Proc. SPIE 9258, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VII, 925809 (February 21, 2015).
  38. Hnatiuc, B., Sabău, A., Dumitrache, C.-L., Hnatiuc, M., Crețu, M., Astanei, D., Changing the surface properties on naval steel as result of non-thermal plasma treatment, ModTech International Conference Iași, (2016) – Modern Technologies in Industrial Engineering IV, IOP Publishing, IOP Conf. Series: Materials Science and Engineering 145.
  39. B. Hnatiuc, S. Ghita, P. Exnar, A. Sabau, P. Spatenka, L.-C. Dumitrache, M. Hnatiuc, Biofouling development on plasma treated samples versus layers coated samples, The 8th edition of the International Conference on Advanced Topics in Optoelectronics, Microelectronics and Nanotechnologies, ATOM-N 2016, 25 – 28 August 2016. This sample article is to show you how to prepare your full paper in a regulate style for the proceeding of the IAMU Capacity building Project.
  40. Cornwall, A., & Jewkes, R., What is Participatory Research. Social Science & Medicine, 42(12), (1995), 1667-1676.
  41. Roque, A., Wutich, A., Quimby, B., Porter, S., Zheng, M., Hossain, M. J., Brewis, A., Participatory approaches in water research: A review. WIREs Water, 9(2), (2022), e1577.
  42. Fischer, J., Meacham, M., & Hagger, V. The role of co-production in sustainability science. Nature Sustainability, 3(3), (2020), 182–190.
  43. Leung, K. M., et al. Challenges and opportunities in the development of environmentally friendly marine antifouling coatings. Marine Pollution Bulletin, 158, (2020), 111380.
  44. Chambers, R. Participatory rural appraisal (PRA): Challenges, potentials and paradigm. World Development, 22(10), (1994), 1437–1454.
  45. Kindon, S., Pain, R., & Kesby, M. (Eds.). Participatory action research approaches and methods. Routledge (2007).
  46. Ban, N. C., Gurney, G. G., Marshall, N. A., Whitney, C. K., Mills, M., Gelcich, S., Bennett, N. B., Meehan, M. C., Butler, C., Ban, S., Tran, T. C., Cox, M.E., Breslow, S. J. Well-being outcomes of marine protected areas. Nature Sustainability, 2(6), (2018), 524–532.
  47. Bailey, M., Bush, S. R., Oosterveer, P., Larastiti, L. Localizing marine spatial planning through participatory research: Insights from aquaculture in Indonesia. Marine Policy, 125, (2021)104378.
  48. Quinn, G.P. and Keough, K.J. Experimental Design and Data Analysis for Biologists. Cambridge University Press, London (2002).
  49. Zarauz, L. and Irigoien, X.. Effects of Lugol’s fixation on the size structure of natural nano– microplankton samples, analyzed by means of an automatic counting method, Journal of Plankton Research, Volume 30, Issue 11, November (2008), 1297–1303.
  50. Bracken, L. J., Bulkeley, H. A., Whitman, G. Transdisciplinary research: understanding the stakeholder perspective. Journal of Environmental Planning and Management, 58(7), (2014),1291–1308. https://doi.org/10.1080/09640568.2014.921596. https://doi.org/10.1080/09640568.2014.921596
  51. Breckwoldt, A., Lopes, P. F. M., Selim, A. Look Who’s Asking—Reflections on Participatory and Transdisciplinary Marine Research Approaches. Frontiers in Marine Science, 8 (2021).