IAMU Research Project FY2019 Final Report
A critical analysis of the integration of sustainable development principles and practices in maritime higher education institutions (SDiMET)
| Publication Year | 2020 |
| Research Coordinator | Michael Ekow Manuel |
| Research Partners | Santiago Ordás Jiménez; Angelica M. Baylon; Johan Bolmsten; Mohamed S. Rowihil; Alina Prylipko |
| Publisher | International Association of Maritime Universities (IAMU) |
| DOI | https://doi.org/10.68436/r20190303 |
Abstract
[Background] The International Maritime Organization (IMO), in the last couple of decades and in tandem with other United Nations bodies has shown an increasing commitment to the notion of Sustainable Development (SD). This focus by the IMO is reflected in a number of policy statements and actions not least the Organization’s strategic plan for the years 2018 to 2023 At the same time, the discourse on SD has become quite well established in the literature and in academic practical discourse. Regrettably, the concept does not appear to have been topical for transnational inter-university collaboration and specifically, its implications for maritime education and training does not appear to have been sufficiently addressed. In the specific case of the International Association of Maritime Universities (IAMU), an examination of the key statements of the Association indicate that although the global focus on SD may be said to have gained traction in the early 1980s, it is only the Association’s most recent Statement of 2019 (the Tokyo Statement) that specifically mentions SD and encourages member universities to engage comprehensively with it. [Objectives] In light of this, the research effort being reported on – A Critical Analysis of the Integration of Sustainable Development Principles and Practices in Maritime Higher Education Institutions (SDiMET) – sought to explore the landscape of SD in maritime higher education with specific reference to the IAMU. Its specific objectives included the analysis of the concept of SD and its applicability to Maritime Higher Education Institutions (MHEI); an exploration of the status quo regarding MHEI integration of sustainability principles in their management, operations and curricula activities; the identify of barriers to such integration; the analysis of the contemporary approaches for SD in MHEI and the suggesting of ways of improving the SD performance of MHEI with particular reference to the membership of the IAMU. [Methodological approach] The research utilized a mixed-methods approach, combining two comprehensive surveys with in-depth semi-structured interviews. The surveys were targeted at IAMU member universities for, first institutional responses and second for student responses. The interviews were with representatives of the member universities [Results] Responses were received from 919 students (of which 405 were used in the research to prevent data skewing) and 73 responses from institutional representatives (administrative and/or faculty members of member universities). [Limitations] Answers to survey questionnaires and in interviews always carry a subjective element based on the particular perspectives of the respondents and sometimes social desirability. In this way the research is limited in reflecting the objective reality about SD in IAMU member universities. Furthermore, a census approach may have been more informative. The resources committed to this research allowed only for a sampling approach to be taken. Although the institutional response rate was a relatively high 47%, a census approach would have increased objectivity. Future research may be directed at more objective empirical studies and at a census approach that collects data at the institutional level from all the 66 member universities of the IAMU. Additionally, the COVID-19 pandemic precluded the possibility of carrying out face-to-face interviews with the possibility of site visits and in-depth document analysis. [Conclusions and implications of key findings]. It was concluded that there was room for improvement in how SD principles are integrated in MHEI. The role of IAMU was acknowledged to be important, even critical, to helping to make progress on such integration. Recommendations include the Association taken explicit steps to facilitate the development and integration of SD principles in the operations and curriculum of its member universities, in particular, in light of its Tokyo Statement of 2019.
Keywords
Sustainable development, sustainability, education for sustainable development, higher education, maritime higher education, maritime industry, shipping, MET, IAMU
References
- Barros J. and Diego R. I., “A review of measurement and analysis of electric power quality on shipboard power system networks”, Renewable and Sustainable Energy Reviews”, Vol. 62, (2016), pp 665-672.
- Geertsma R. D., Negenborn R. R., Visser K., Hopman J. J., “Design and control of hybrid power and propulsion systems for smart ships: A review of developments”, Applied Energy, Vol. 194, (2017), pp 30-54.
- Kumar D., Zare F., “Comprehensive review of maritime microgrids: system architectures, energy efficiency, power quality and regulations” IEEE Access, Vol. 7, No. 99, (2019), pp. 1–11.
- Mindykowski J., “Contemporary challenges to power quality in ship systems-metrological perspective”, Proceedings of the 22nd IMEKO TC4 International Symposium & 20th International Workshop on ADC Modelling and testing, Iasi, Romania, (2017), pp 536-558.
- Mindykowski J., “Power quality on ships: today and tomorrow’s challenges”, Keynote speech, International Conference and Exposition on Electrical and Power Engineering EPE 2014, (2014), Jasi, Romania, pp 001-018.
- Rodrigues T. A., Neves G. S., Gouveia L. C. S., Abi-Ramia M. A. Jr., Fortes M. Z., Gomes S. Jr., “Impact of electric propulsion on the electric power quality of vessels”, Electric Power System Research, Vol. 155, (2018), pp 350-362.
- Skjong E., Volden R., Rodskar E., Molinas J. T. A., Cunnigham J., “Past, present and future challenges of the marine vessel’s electrical power system”, IEEE Transactions on Transportation Electrification, Vol. 2, No 4, (2016), pp 522-537.
- Terriche Y., Mutarraf M. U., Golestan S., Su C. L., Guerrero J. M., Vasquez J. C., Kerdoun D., “A hybrid compensator configuration for VAR control and harmonic suppression in all-electric shipboard power systems”, IEEE Transactions on Power Delivery, Vol. 35, No 3, (2020), pp 1379-1389.
- Tarasiuk T., “Angular frequency variations at microgrids and its impact on measuring instruments performance”, IET Generation, Transmission & Distribution, Vol. 10, Vo.13, (2016), pp. 3234-3240.
- Electrical installations in ships – Part 101: Definitions and general requirements, IEC Standard 60092-101, (2018).
- Requirements Concerning Electrical and Electronic Installations, International Association of Classification Societies, IACS Req., (2019).
- Rules for building and classing steel vessels, Part 4 Vessel systems and machinery, American Bureau of Shipping, (2019).
- Rules for classification ships, Part 4 Systems and components, Chapter 8 Electrical installations, DNV GL, Edition July 2019, Amended October 2019.
- Gnaciński P., Mindykowski J., Tarasiuk T., “Effect of power quality on windings temperature of marine induction motors. Part II: Results of investigations and recommendations for related regulations”, Energy Conversion and Management, Vol. 50, No. 10, (2009), pp 2477-2485.
- Gnaciński P. “Power quality and marine induction motors with higher class of insulation than resulting from windings temperature rise”, Proc. International Conference on Electrical Machines ICEM 2016, Lausanne, Switzerland, (2016), pp. 2002-2008.
- P. Gnaciński, “Thermal loss of life and load-carrying capacity of marine induction motors”, Energy Conversion and Management, vol. 78, pp. 574-583, Feb. 2014.
- Gnaciński P. et al, “Coefficient of voltage energy efficiency”, IEEE Access, Vol. 8, (2020), pp 75043-75059.
- 2012 Guidelines on survey and certification of the Energy Efficiency Design Index (EEDI), Resolution MEPC.214(63), International Maritime Organization, (2012), available at http://www.imo.org.
- 2012 Guidelines for the development of a Ship Energy Efficiency Management Plan (SEEMP), Resolution MEPC.213(63), International Maritime Organisation, (2012), available at http://www.imo.org
- Interim guidelines on the method of calculation of the Energy Efficiency Design Index for new ships, Document MEPC.1/Circ.681, (2009)
- Requirements concerning electrical and electronic installations, harmonic distortion for ship electrical distribution system including harmonic filters, UR E24, International Association of Classification Societies, (2016).
- Dudojć B., Mindykowski J., “Diagnostic measurements of harmonic filters as an instrument of energy quality improvement in ship's networks” (in Polish), Zeszyty Naukowe WSM w Gdyni, Vol. 31, (1997), pp 120-131.
- Report of the investigation of the catastrophic failure of a capacitor in the aft harmonic filter room on board RMS Queen Mary 2 while approaching Barcelona on 23 September 2010, Marine Accident Investigation Branch: Southampton, UK, (2011), available at http://www.maib.gov.uk/publications/investigation_reports/2011/qm2.cfm
- De S., Debnath S., “Optimal switching strategy of an SVC to improve the power quality in a distribution network”, IET Science, Measurement & Technology, Vol. 13, No. 5, (2019), pp. 640-649.
- Duarte S. X., Kagan N. A., “Power-quality index to assess the impact of voltage harmonic distortions and unbalance to three-phase induction motors”, IEEE Transactions on Power Delivery, Vol. 25, No. 3, (2010), pp 1846-1854.
- Gnaciński P., “Effect of power quality on windings temperature of marine induction motors. Part I. Machine model,” Energy Conversion and Management, Vol. 50, No. 10, (2009), pp 2463-2476.
- Gnaciński P., Mindykowski J., Tarasiuk T. , “A new concept of the power quality temperature factor and its experimental verification,” IEEE Trans. on Instrumentation and Measurement, Vol. 57, No. 8, (2008), pp 1651-1660.
- Mishra D. P., Ray P., “Calculation of power quality factor of supply system using LabVIEW”, Michael Faraday IET International Summit 2015, available at IEEE Xplore.
- Nagarjuna, M., Panda, P. C., Sandeep, A., “Power quality factor improvement using shunt active power line conditioner”, Proc. 2014 IEEE International Conference on Advanced Communications, Control and Computing Technologies, (2014), pp 411-415.
- Singh H., Abdullah M. Z., Qutieshat A., “Detection and classification of electrical supply voltage quality to electrical motors using the Fuzzy-Min-Max neural network”, IEEE International Electric Machines & Drives Conference IEMDC 2011, (2011), pp 961-965.
- Sinha P., Debnath S., Goswami S. K, “A new wavelet and fuzzy based power quality index for distribution systems under stationary and nonstationary disturbances”, Michael Faraday IET International Summit 2015, Kolkata, (2015), pp 481-486.
- Yang J., Wan, S., Liu C., Wan, R., Ma J., Xu K., Lu Q. “Power quality assessment based on combinatorial weight method of variance maximizing”, Journal of Physics: Conference Series, Vol. 1087, No. 5, (2018).
- de Buck F. G. G., Gistelinck P., and de Backer D., “A simple but reliable model for inverter-supplied induction motors”, IEEE Trans. Ind. Appl., Vol. 1A-20, No. 1, (1984), pp 190–202.
- Boglietti A, Cvaganino A, Lazzari M, Pastorelli M. “Predicting iron losses in soft magnetic materials with arbitrary voltage supply: an engineering approach”, IEEE Trans. on Magnet., Vol. 39, No 2, (2003), pp 981-989.
- Debruyne C., Desmet J., Derammelaere S., Vandevelde L., “Derating factors for direct online induction machines when supplied with voltage harmonics: A critical view”, Proc. 2011 IEEE International Electric Machines & Drives Conference IEMDC, (2011), pp 1048-1052.
- Donolo P., Bossio G., De Angelo C., García G., Donolo M., “Voltage unbalance and harmonic distortion effects on induction motor power, torque and vibrations,” Electric Power Systems Research, Vol. 140, (2016), pp. 866–873.
- Donolo P., Pezzani C., Bossio G., De Angelo C., Donolo M., “Derating of induction motors due to power quality issues considering the motor efficiency class” IEEE Transactions on Industry Applications, Vol. 56, No. 2, (2020), pp 961-969.
- Donolo P., Pezzani M., Bossio G., Quispe E. C., Valencia D., Sousa V., “Impact of voltage waveform on the losses and performance of energy efficiency induction motors”, Proc. IEEE ANDESCON, Santiago de Cali, (2018), pp. 1-4.
- Gnaciński P. “Prediction of windings temperature rise in induction motors supplied with distorted voltage”, Energy Conversion and Management, Vol. 49, No. 4, (2008), pp 707-717.
- Gnaciński P. “Windings temperature and loss of life of an induction machine under voltage unbalance combined with over or undervoltages”, IEEE Trans. on Energy Conversion, Vol. 23, No. 2, (2008), pp 363-371.
- Gnaciński P., Hallmann D., Pepliński, M., Jankowski, P., “The effects of voltage subharmonics on cage induction machine”. International Journal of Electrical Power & Energy Systems, Vol. 111, (2019), pp 125-131.
- Gnaciński P., Pepliński M., “Lowered voltage quality and load-carrying capacity of induction motors”, IET Electric Power Applications, Vol. 10, No. 9, (2016), pp 843-848.
- Gnaciński P., Pepliński M., Hallmann D., Jankowski, P., “Induction cage machine thermal transients under lowered voltage quality”, IET Electric Power Applications, Vol. 13, No. 4, (2019), pp 479-486.
- Gnaciński P., Pepliński M., Murawski L., Szeleziński A., “Vibration of induction machine supplied with voltage containing subharmonics and interharmonics”. IEEE Transactions on Energy Conversion, Vol. 34, No. 4, (2019), pp 1928-1937.
- Gnaciński P., Tarasiuk T., “Energy-efficient operation of induction motors and power quality standards”, Electric Power Systems Research, Vol. 135, (2016), pp 10–17.
- Gonzalez-Cordoba J. L., Osornio-Rios R. A., Granados-Lieberman D., Romero-Troncoso R. D. J. Valtierra-Rodriguez M., “Correlation model between voltage unbalance and mechanical overload based on thermal effect at the induction motor stator”, IEEE Transactions on Energy Conversion, Vol. 32 No. 4, (2017), pp. 1602-1610.
- Wahsh S, El-Bakry M. “Additional core losses in induction machines with PWM inverter”, European Transactions on Electrical Power, Vol. 1, No. 4, (1991), pp 189-193.
- Zhang D., An R., Wu T., “Effect of voltage unbalance and distortion on the loss characteristics of three-phase cage induction motor”, IET Electric Power Applications, Vol. 12, No. 2, (2018), pp. 264-270.
- Rotating electrical machines – Part 2-1 Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles), IEC/EN Standard 60034-2-1, (2014).
- Gross, Ch. A., “Electric machines”, CRC Press Tylor&Francis Group, Boca Raton, (2007).
- Shenkman A. L, Chertkov M., “Heat condition of a three-phase induction motor by a one-phase supply”, IEE Proc –Electric Power Applications; Vol. 146, No. 4, (1999), pp361-367.
- Latek W., “Testing of electrical machines in industry” (in Polish), Wydawnictwo Naukowo-Techniczne, Warsaw, Poland, (1979).
- B. Dubicki, “Electrical machines. Part III, Induction Motors,” (in Polish) Państwowe Wydawnictwo Naukowe, Warsow, Poland, (1964).
- Ertan, H. B., Leblebicioglu K., Avenoglu, B., Pirgaip, M., “High-frequency loss calculation in a smooth rotor induction motor using FEM”, IEEE Transactions on Energy Conversion, Vol. 22, No. 3, (2007), pp 566-575.
- Kostić M. M., “Calculation improvement of no-load stray losses in induction motors with experimental validation”, Serbian Journal of Electrical Engineering, Vol. 12, No. 3, (2015), pp. 303-320.
- Novotny D. W., Nasar S. A., “High frequency losses in induction motors”, NASA contractor report on grant No. NAG3-940, University of Wisconsin, (1991), available at https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19910015251.pdf.
- Agamloh E. B., “The partial-load efficiency of induction motors”, IEEE Trans. Ind. Appl., Vol. 45 No. 1, (2009), pp 332–340.
- De Almeida, A. T., Ferreira, F. J., Fong, J. A., “Standards for efficiency of electric motors”, IEEE Industry Applications Magazine, Vol. 17, No 1, (2010), pp 12-19.
- Siraki A. G., Pillay P., “In situ efficiency estimation technique for induction machines working with unbalanced supplies”, IEEE Transactions on Energy Conversion, Vol. 27, No. 1, (2012), pp 85 -95.
- Ferreira F.J.T.E., de Almeida A.T., “Method for in-field evaluation of the stator winding connection of three-phase induction motors to maximize efficiency and power factor”, IEEE Transactions on Energy Conversion, Vol. 21, No. 2, (2006), pp 370–379.
- da Costa Bortoni E., “Are my motors oversized?” Energy Conversion and Management Vol. 50, No. 9, (2009), pp 2282–2287.
- Thirugnanasambandam M., Hasanuzzaman M., Saidur R., Ali M. B., Rajakarunakaran S., Devaraj D., Rahim N. A., “Analysis of electrical motors load factors and energy savings in an Indian cement industry”, Energy, Vol. 36, No. 7, (2011), pp 4307–4314.
- Prousalidis J., Antonopoulos G., Mouzakis P., Sofras E.. “On resolving reactive power problems in ship electrical energy systems”, Journal of Marine Engineering & Technology, Vol. 14, No. 3, (2015), pp 124-136.
- Prousalidis J. M., “The necessity of reactive power balance in ship electric energy systems”, Journal of Marine Engineering & Technology, Vol. 10, No. 1, (2011), pp 37-47.
- IMO Train the Trainer (TTT), Course on Energy Efficient Ship Operation, Module 4 – Ship Board Energy Management, International Maritime Organisation, available at http://www.imo.org
- Rotating electrical machines – Part 30-1: efficiency classes of line operated AC motors (IE code), IEC/EN Standard 60034-30-1, (2014).
- Ferreira F. J., Leprettre B, De Almeida A. T., “Comparison of protection requirements in IE2-, IE3-, and IE4-class motors”, IEEE Transactions on Industry Applications, Vol. 52, No. 4, (2016), pp 3603-3610.
- Tarasiuk T., ”Estimator-analyzer of power quality: Part I – Methods and algorithms,” Measurement: Journal of the International Measurement Confederation, Vol. 44, No. 1, (2011), pp. 238-247.
- Gdynia Maritime University. Horyzont II, available at https://umg.edu.pl/en/en/horyzont-II.
- Uniwersytet Morski w Gdyni. Zdjęcia, available at https://umg.edu.pl/zdjecia.
- Statek Tychy, available: https://umtychy.pl/artykul/112/statek-tychy.
- Instytut Morski Uniwersytetu Morskiego w Gdyni. Statek badawczy Instytutu Morskiego r/v IMOR, available at http://im.umg.edu.pl/statek.
- IEEE Recommended practice for electrical installations on shipboard, IEEE Std. 45, (2002).
- Rotating electrical machines – Part 1: Rating and performance, IEC Standard 60034-1, (2017).
- IEEE Recommended practice for shipboard electrical installations—systems engineering, IEEE Std 45.3, (2015).