IAMU Research Project FY2016 Final Report
An open-source marine systems and vessel modelling platform
| Publication Year | 2017 |
| Research Coordinator | Christian Matthews |
| Research Partners | James Wharton |
| Publisher | International Association of Maritime Universities (IAMU) |
| DOI | https://doi.org/10.68436/r20160304 |
Executive summary
This report details the development of a new software library for the modelling and simulation of marine vessels. The main aims of the project, which were all successfully achieved, was to develop a common library structure (with a hierarchical approach) so that a user with limited expertise can build a model that represents the many complex and connected systems that occur on a vessel. Another aim was to incorporate accurate descriptions of the manoeuvrability and resistances of a vessel to 3 degrees of freedom, whilst through additional python-based script tools, make it easier for a user to attain accurate inputs for the vessel modelling library. The final aim of the study was to incorporate a user interactive real-time simulation interface. A feature which is particular important from a training and educational perspective.
One of the problems when describing the hydrodynamic behaviour of a hull form, in order to understand its manoeuvrability and stability, is that there is no “one-size” fits all approximation. This means that expensive testing methods are usually required, which for many, is out of reach. So, the idea behind the introduction of the high-fidelity computational fluid dynamics (CFD) approach by automated script is to determine Abkowitz-type hydrodynamic derivatives without the need of tow tank testing. Abkowitz showed that these derivatives can describe the manoeuvrability of the ship effectively and from the systems modelling perspective, can easily be implemented within the hull resistance class of the library. This means that a vessel can be simulated in real-time, using the vesselEfficiency library, with the confidence that the force and moments acting upon the body are reasonably realistic.
Before the automation script had been written, a validation exercise was performed to at provide some certainty about the cogency of the modelling approach. Experimental data from the Duisberg test case (DTC) was compared against the steady tow motion simulated. This numerical modelling was performed using the volume of fluids (VOF) solver in the C++ based OpenFOAM CFD code. A range of speeds were simulated (Froude number of 0.174 to 0.218) and the maximum deviation of total drag was found to be 5.69% when compared to experimental data. The k-omega shear stress transport (SST) turbulence model with wall function was used and the results showed that a y+ value, in the range of 30 to 300, was maintained for the majority of the hull surface, satisfying the criteria required for correct boundary layer modelling.
Once this validation exercise had been completed, the next stage was to create an automation script which performed the necessary motions of the planar motion mechanism (PMM): oblique steady drift, pure sway and pure yaw. Using this script in conjunction with OpenFOAM allows for the determination of the hydrodynamic derivatives but also provide validation of actual PMM testing performed in a tow tank facility. The derivatives produced by the script describe the vessel in three degrees of freedom (DOF). The next task is to develop the script so it can account for roll-associated resistance, increasing the description to 4 DOF.
Finally, a key feature of the library is the interactive real-time simulator. It has been demonstrated that the user can interactively control the vessel in real-time by modifying the inputs to the steering and propulsion classes. The Simulink Real-Time software executes the model and gives output relating to its global position. This information is then received by the Unity3D simulation interface over a user datagram protocol (UDP), where a 3D model of the vessel and virtual environment is rendered in real-time.
In relation to future developments, one of the immediate tasks is to continue the resistance modelling with benchmark data for validation purposes. Then the resistance classes shall be developed further in order to incorporate roll-related resistance. Once validated, confidence in the modelling process will allow for the generation of example hulls and their descriptions which can be included within the library for ease-of-use. Future work shall be to further develop the vessel modelling library by expanding on the number of subsystems available.
Keywords
Vessel modelling, Real-time simulation, Computational fluid dynamics (CFD), Hydrodynamic derivatives, Planar motion mechanism (PMM), Linear hydrodynamic coefficients,
References
- Duru, O., "The origin and consistency of the ton-mile metric in the shipping economics". Logistics, Vol. 1, No. 1, (2017), pp 1-8.
- "Resolution MSC.137(76) Standards for Ship Manoeuvrability". International Maritime Organization (IMO), (2002).
- Hajivand, A. and S.H. Mousavizadegan, "Virtual maneuvering test in CFD media in presence of free surface". Int. J. Nav. Archit. Ocean Eng., Vol. 7, (2015), pp 540-558.
- Kim, H., H. Akimoto, and H. Islam, "Estimation of the hydrodynamic derivatives by RaNS simulation of planar motion mechanism test". Ocean Engineering, Vol. 108, (2015), pp 129-139.
- Araki, M., et al., "Estimating maneuvering coefficients using system identification methods with experimental, system-based, and CFD free-running trial data". Ocean Engineering, Vol. 51, (2012), pp 63-84.
- He, S., et al., "Manoevering prediction based on CFD generated derivatives". Journal of Hydrodynamics, Vol. 28, No. 2, (2016), pp 284-292.
- "Guidelines on use of RANS tools for manoeuvring prediction (7.5-03-04-01)". International Towing Tank Conference (ITTC), (2011).
- Abkowitz, M.A., "Lecture notes on ship hydrodynamics-steering and manoeuverability ". Hydro and Aerodynamics Laboratory (Lyngby, Denmark), (1964).
- Moctar, O., V. Shigunov, and T. Zorn, "Duisburg Test Case: Post-Panamax Container Ship For Benchmarking". Ship Technology Research, Vol. 59, No. 3, (2012), pp 50-64. Meiwa Building 8F, 1-15-10 Toranomon, Minato-ku, Tokyo 105-0001, Japan Tel : 81-3-6257-1812 E-mail : info@iamu-edu.org URL : http://www.iamu-edu.org International Association of Maritime Universities ISBN No. 978-4-907408-19-0